c50 carbon tool steel
"
30 밀리미터 두께 C45 1045 뜨거운 굴려진 탄소공구강
Hot rolled C45 / 1045 carbon steel plate in 30mm thickness shipping Description:The medium carbon high strength carbon structural steel has high strength and hardness after quenching. The steel has medium machinability, low cold deformation plasticity, poor weldability, no temper brittleness during heat treatment, but low hardenability. The critical diameter in water is 13 * 30MM, and there is cracking tendency during water quenching. This steel is usually used after heat
톱 기계 4는 C45 1045 S45C 탄소공구강을 측면을 댑니다
Saw Machine 4 Sides Cutting C45 / 1045 / S45C Carbon Steel Plate Description:The medium carbon high strength carbon structural steel has high strength and hardness after quenching. The steel has medium machinability, low cold deformation plasticity, poor weldability, no temper brittleness during heat treatment, but low hardenability. The critical diameter in water is 13 * 30MM, and there is cracking tendency during water quenching. This steel is usually used after heat
T10 탄소 강재 환봉
T10 High Carbon Steel Round Bar For Knife Blade Using This T10 steel has higher strength and wear resistance than T8 and T9, but low thermal hardness, low hardenability and large quenching deformation.Suitable for manufacturing cutting conditions, wear resistance requirements are higher, and not subjected to sudden and violent vibration, need a certain toughness and a sharp edge of all kinds of tools, such as turning tool, planer, drill bit, paper cutting machine, low
정확성 측정 공구 O1 둥근 봉 냉각 공구 강
High carbon din 1.2510 steel O1 alloy SKS3 hot rolled tool Steel Specifications and 1.2510 /O1/SKS3 Tool steel for cold-working at low speeds with low tendency to hardening cracking and dimensional deformation while hardening and tempering processes. 1.2510 /O1/SKS3 steel and its equivalents are materials exhibiting high hardness, as well as significantly increased resistance to abrasion, what favors cutting processes during operation. Application The 1.2510 /O1/SKS3 Tgrades
CR12MOV 200 밀리미터 가열 냉각 둥근 봉 냉각 공구 강
D2 Steel Flat Bar Annealing 50mm Thickness For Cold Stamping Dies With Lowest Price Description D2/1.2379/ die steel is a kind of high carbon and high chromium cold working die steel widely used in the world. It belongs to ledeburite steel with high hardenability, hardenability and high wear resistance. It has good high temperature oxidation resistance, good corrosion resistance after quenching and polishing, and small deformation after heat treatment Application: It is
SKD11 CR12MOV 냉각 공구 강 AISI 표준 부식 방지
1.2379/D2/SKD11 Cold Work Tool Steel Round Bar 100mm Diamater Description D2/1.2379/ die steel is a kind of high carbon and high chromium cold working die steel widely used in the world. It belongs to ledeburite steel with high hardenability, hardenability and high wear resistance. It has good high temperature oxidation resistance, good corrosion resistance after quenching and polishing, and small deformation after heat treatment Application: It is suitable for tool steel
JIS Skd11 56-58Hrc 냉각 공구 강 플레이트 Dia 6mm-430mm
jis skd11 cold work steel plate quenching hardness 56 ~ 58 hrc Description D2/1.2379/ die steel is a kind of high carbon and high chromium cold working die steel widely used in the world. It belongs to ledeburite steel with high hardenability, hardenability and high wear resistance. It has good high temperature oxidation resistance, good corrosion resistance after quenching and polishing, and small deformation after heat treatment Application: It is suitable for tool steel
AISI T1 DIN 1.3343 SKH51 M2 경화증 고속도 스틸 공구
Wholesale AISI T1 DIN 1.3343/SKH51/M2 Hardening High Speed Steels Product Name mould steel/plastic mould steel/ tool steel/alloy steel/carbon steel/steel round bar /steel plate/special steel/die steel/mould base/cold work tool steel/hot work tool steel/ Length any size can custom-made Width any size can custom-made Thickness any size can custom-made Chemical composition Grade C Si W Cr Mn Mo V P S M2 0.80-0.90 0.20-0.45 5.5-6.75 3.8-4.4 0.15-0.40 4.5-5.5 1.75-2.2 ≤0.03 ≤0.03
블레이드 고속도 스틸 공구를 줄이는 SKH51 DIN 1.3343 M2
DIN 1.3343/SKH51/M2 Hardening High Speed Steel M2 is a molybdenum type high speed steel, which has the advantages of low carbide inhomogeneity and high toughness.It is easy to overheat, so the quenching temperature should be strictly controlled.Due to its good hardness and wear resistance, it is mainly used to make cutting tools of difficult cutting materials.M2 high speed steel has a great tendency of carbide, so it has a strict requirement for heat treatment protection, and
