p20 injection mold base
"
Σκληρότητα 32-38HRC 718H καυτή - κυλημένος χάλυβας γύρω από το φραγμό
Hot rolled 718H steel round bar hardness 32-38HRC 1.2738 steel is a vacuum-melting chromium-nickel-molybdenum alloy steel that has been hardened and tempered before it leaves the factory. It offers the following advantages: No risk of quench cracking and heat treatment; no need for heat treatment; shorten the cycle time; Cost (for example, without overseas Chinese is deformation); easy to amend the mold; nitriding and surface hardening can be applied to improve the mold
718H 300MM σκληρότητα 32-38HRC διαμέτρων καυτή - κυλημένος γύρω από το φραγμό
Hot rolled 718H steel round bar hardness 32-38HRC 1.2738 steel is a vacuum-melting chromium-nickel-molybdenum alloy steel that has been hardened and tempered before it leaves the factory. It offers the following advantages: No risk of quench cracking and heat treatment; no need for heat treatment; shorten the cycle time; Cost (for example, without overseas Chinese is deformation); easy to amend the mold; nitriding and surface hardening can be applied to improve the mold
σφυρηλατημένος 32-38HRC χάλυβας σκληρότητας διαμέτρων 718H 300MM γύρω από το φραγμό με την επιφάνεια αποφλοίωσης
Hot rolled 718H steel round bar hardness 32-38HRC 1.2738 steel is a vacuum-melting chromium-nickel-molybdenum alloy steel that has been hardened and tempered before it leaves the factory. It offers the following advantages: No risk of quench cracking and heat treatment; no need for heat treatment; shorten the cycle time; Cost (for example, without overseas Chinese is deformation); easy to amend the mold; nitriding and surface hardening can be applied to improve the mold
SAE1050 φραγμός χάλυβα εργαλείων άνθρακα που αλέθεται
Forged SAE1050 carbon Tool Steel Plate milled surface for big plastic injection mold base Description: The medium carbon high strength carbon structural steel has high strength and hardness after quenching. The steel has medium machinability, low cold deformation plasticity, poor weldability, no temper brittleness during heat treatment, but low hardenability. The critical diameter in water is 13 * 30MM, and there is cracking tendency during water quenching. This steel is
1.2311 3CR2MO φραγμός χάλυβα εργαλείων με τη σκληρότητα 30-35HRC
P20 / 1.2311/ 3CR2MO Plastic Mold Steel Flat Bar Description Plastic mold includes thermoplastic mold and thermosetting plastic mold. The steel for plastic mould is required to have certain properties such as strength, hardness, wear resistance, thermal stability and corrosion resistance. Application: It is suitable for plastic mould and mould base of TV front shell, telephone set, drinking machine, vacuum cleaner, etc. Thermoplastic injection mold, extrusion mold. Thermoplas
